Introduction
The automatic booster system consists of a water pump,and airtight pressure tank,and a pressure switch.The specially designed structure make it better appearance and performance.The pressure tank with a non-toxic rubber membrane,or called pressure vessel,has been pre-filled with air pressure of about 0.12 Mpa before leaving the factory.These systems give suitable mains water pressure as required by moderm domestic appliances and industrial applications,and will ensure enough water to supply all useroutlets.
Application Feilds
Widely used in living water supply ,well water pumping,pressurization of tap water,hot-water pipeline pressurization,water tower water supply,gardens and vegetable greenhouse watering,aquaculture water supply and drainage and so on.
Working Condition
Max. fluid temperature +60℃
Max. ambient temperature +40℃
Max. solid impurity:0.1%,Max. particle size: 0.2mm.
Construction
Pump
Pump Body: Cast iron
Impeller: Brass
Mechanical Seal:Carbon/Ceramic/Stainless steel
Motor
Single Phase
Heavy Duty Continuous Work
Motor Housing:Aluminum
Shaft: Carbon Steel / Stainless Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Construction and safty standards in compliance with IEC
220V/50HZ.60HZ 110V/50HZ.60HZ 220v.110v/50hz.60hz are avaliable on request.
Technical data and Overall & installation dimension
